Bosch Rexroth IndraControl L40 - Fig. 8-4: Fuse Replacement

8-6 Installation and Maintenance IndraControl L40
DOK-CONTRL-IC*L40*****-PR02-EN-P
Proceed as follows to replace the fuse: Also see the illustrations in
Fig. 8-4.
• Swing up the fuse lever (A).
• Put a screwdriver behind a metal contact of the fuse (B).
• Carefully pry out the metal contact of the fuse (C).
• Remove the fuse by hand (D).
• Latch in the new fuse (E).
• Press the fuse lever down again until it clicks into place (F).
AB
C
D
EF
Sicherungswechsel.FH9
Fig. 8-4: Fuse replacement
IAS COMPONENTS www.ias-components.com info@ias-components.com