IndraControl L40 System Presentation 1-1
DOK-CONTRL-IC*L40*****-PR02-EN-P
1 System Presentation
1.1 Brief Description of IndraControl L40
The IndraControl L40 is a modular and scalable control. It combines the
benefits of an embedded-PC architecture with a standardized I/O system
with terminals. It is a universal hardware platform that can be used for
motion-logic and PLC applications. The hardware is available in system-
specific versions (e.g. with/without SERCOS interface). It provides
onboard interfaces, e.g. high-speed inputs and outputs (8 each) and
communication interfaces, such as Ethernet, PROFIBUS, RS232 and
SERCOS. Via the integrated PCI bus, additional modules permit
extension of the IndraControl L40 by additional field-bus and technology
interfaces, such as DeviceNet and master-axis-encoder interfaces. The
locally available I/O units can be extended by the Rexroth Inline I/O
system, just by simply mounting the components side by side. Application
programs, incl. runtime, are completely stored to an easily accessible
standardized Compact Flash medium.
1.2 View
Control elements and interfaces are arranged on the front.
The eight-digit display with four operator keys, the Reset button with light-
emitting diode, the RS232 interface, and the receptacle for the Compact
Flash card are provided to the left of the unit. Further interfaces (Ethernet,
PROFIBUS DP, SERCOS, Ready contact) are located in the central
section of the unit. The terminals for digital inputs and outputs (eight
each) and the voltage supply connectors are arranged to the right of the
unit.
Ansicht.tif
Fig. 1-1: View of a typical IndraControl L40 unit, with further optional
interfaces arranged in the central section.
IAS COMPONENTS www.ias-components.com info@ias-components.com
To Next Page
Loading...
