EasyManua.ls Logo

Bosch Rexroth IndraControl L45 - Ready Contact

Bosch Rexroth IndraControl L45
84 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
RJ45, female connector, 8-pin
Type: Ethernet 100 Base TX
Cable length: 100 m max.
Cable type: CAT5e with S/STP
Transmission rate: 100 MBit/s
max. 100 m
1
8
2
1
3
4
5
6
7
8
Ethernet RJ45
Ethernet
to the network
Fig.7-26: Real-time SERCOS III interface
LED
Status
L (link) On: Link to network is available
Off: No connection to network
S (send) On: Data packets are sent
Off: No data is sent
7.4.5 Ready Contact
X2R ready contact
1
3
2
1 2
Fig.7-27: Ready Contact
Pins 1 and 2 of the 3-pin connector strip X2R are the connection points for the
ready contact.
For terminal connectors use copper conductors only.
The ready contact has a single-channel setup.
Characteristics of the relay (photo-MOS
relay)
Switching capacity 1 A, DC 60 V
Bosch Rexroth AG DOK-CONTRL-ICL45L65L85-PR01-EN-P
Rexroth IndraControl L45/L65/L85 Control
46/81
Connections and Interfaces

Table of Contents

Other manuals for Bosch Rexroth IndraControl L45

Related product manuals