Order code Parts number Description
R-IB IL CML S01-
PLSET
R911299856 Connector set for IndraControl,
unique numbering
R-IB IL CML S04-
PLSET
R911172193 Connector set for IndraControl,
continuous numbering
9.2.2 Further Accessories (Rexroth Inline Terminals, Function Modules, In‐
terface Cables, Fans)
Rexroth Inline Terminals
The
current Rexroth Inline terminals are listed in the Bosch Rexroth product
catalog on the Internet http://www.boschrexroth.com/dcc/Vornavigation/Vor‐
Navi.cfm?PageID=g97568&Language=en
Rexroth Function Modules
Order code
Parts number Description
CFL01.1-E2 R911170365 Fast IO
CFL01.1-N1 R911170012 Programmable limit switch
CFL01.1-R3 R911170008 SERCOS III
CFL01.1-Q2 R911170009 SERCOS 2 / cross-communication
CFL01.1-TP R911170832 Profibus DP + RT-Ethernet
CFL01.1-G1 R911171044 EnDat interface (in preparation)
Fig.9-4: Function modules
The function module support depends on the firmware used! Please
refer to the relevant documentation!
EMI shielding
The
EMI shielding is to be mounted if the "programmable limit switch" function
module (CFL01.1-N1 R911170012) is used in noisy environment. This recom‐
mendation applies to programmable limit switch modules that are plugged in
the 3
rd
or 4
th
slot at the left side of the function module bus.
Order code
Parts number Description
CAL04.1-SH R911172216 EMI shielding
Fig.9-5: EMI shielding
Interface Cables
Ethernet interface
Order code
Parts number Description
RKB0007/00,15 R911170146 Ethernet cable, 100Base-TX, CAT.5, cross‐
link,
ready-made, with RJ45 connector on both
sides, 0.15 m
RKB0007/002,5 R911170147 Ethernet cable, 100Base-TX, CAT.5, cross‐
link,
ready-made, with RJ45 connector on both
sides, 2.5 m
RKB0007/005,0 R911170148 Ethernet cable, 100Base-TX, CAT.5, cross‐
link,
ready-made, with RJ45 connector on both
sides, 5.0 m
Bosch Rexroth AG DOK-CONTRL-ICL45L65L85-PR01-EN-P
Rexroth IndraControl L45/L65/L85 Control
70/81
Ordering Information
To Next Page
Loading...
