● C22.2 no. 142-M1987 (CSA)
However, there can be combinations or extension stages with limited or miss‐
ing certification. Thus, verify the certification by using the UL marking on the
device.
Loss of UL and CSA conformity due to changes to the device.
The UL and CSA marking is only valied for the device in its deliv‐
ery status. After having modified the device, the UL and CSA con‐
formity is to be verified.
To guarantee an UL/CSA-compliant operation, the following con‐
ditions have to be fulfilled:
● Use only insulated copper wire suitable for at least 60/75 °C.
Bosch Rexroth AG DOK-CONTRL-IC*LX5*****-IT01-EN-P
Rexroth IndraControl L25, L45, L65 and L85 Controls
20/65
Standards
To Next Page
Loading...
