● Provide the following minimum clearances for sufficient cooling:
30 mm
30 mm
30 mm
100 mm
100 mm
Fig.5-7: Minimum distances for the circulation of surrounding air
If there are several rows of function modules, the supply air has to be
measured under each row and its limit value must be observed. For in‐
formation on surrounding air temperature, please refer to chapter 4.3
"Ambient Conditions" on page 20.
● Additionally, provide sufficient clearance for mounting, dismounting, con‐
nector and cable length.
Bosch Rexroth AG DOK-CONTRL-ICL45L65L85-PR01-EN-P
Rexroth IndraControl L45/L65/L85 Control
28/81
Dimensions
To Next Page
Loading...
