Bosch Rexroth IndraControl VCP 20.2 - Environmental Conditions

R911310381 / 02 | Rexroth IndraControl VCP 20 Electric Drives and Controls | Bosch Rexroth AG 4-5
Technical Data
4.8 Environmental Conditions
Environmental Conditions
Environmental
Temperature
Operation + 5 °C to + 45 °C (+ 41 °F to + 113 °F)
Transportation,
Storage
- 20 °C to + 60 °C (- 4 °F to + 140 °F)
Maximum Tem-
perature Gradient
Operation,
Transportation,
Storage
Temporal Temperature Variations up to 3 K per Minute
Humidity Operation Minimum Relative Humidity: 5%
Maximum Relative Humidity: 85%
Minimum Absolute Humidity: 1 g/m
3
Maximum Absolute Humidity: 25 g/m
3
No Condensation Permitted
According to the Clima Class 3K3 to EN 60721-3-3
Transportation Minimum Relative Humidity: 5%
Maximum Relative Humidity: 75%
Minimum Absolute Humidity: 1 g/m
3
Maximum Absolute Humidity: 25 g/m
3
No Condensation Permitted
According to the Clima Class 2K2 to EN 60721-3-2
Storage Minimum Relative Humidity: 5%
Maximum Relative Humidity: 85%
Minimum Absolute Humidity: 1 g/m
3
Maximum Absolute Humidity: 25 g/m
3
No Condensation Permitted
According to the Clima Class 1K2 to EN 60721-3-1
Atmospheric
Pressure
Operation To 2000 m about Sea Level According to DIN EN 61131-2
Transportation To 3000 m about Sea Level According to DIN EN 61131-2
Storage To 3000 m about Sea Level According to DIN EN 61131-2
Mechanical
Strength
Operation Maximum Vibration:
Frequency Range: 10 Hz to 150 Hz
Deflection: 0,075 mm (0.003") at 10 Hz to 57 Hz
Acceleration: 1 g at 57 Hz to 150 Hz
According to DIN EN 60068-2-6
Transportation,
Storage
Maximum Shock:
15 g 11 ms According to DIN EN 60068-2-27, No Distur-
bance of the Function
Application Area Operation Degree of Pollution 2, Overvoltage Category II
Transportation,
Storage
Degree of Pollution 2
Courtesy of CMA/Flodyne/Hydradyne ▪ Motion Control ▪ Hydraulic ▪ Pneumatic ▪ Electrical ▪ Mechanical ▪ (800) 426-5480 ▪ www.cmafh.com