Bosch Rexroth IndraControl VCP 20.2 - Table of Contents

R911310381 / 02 | Rexroth IndraControl VCP 20 Electric Drives and Controls | Bosch Rexroth AG III
Contents
Contents
1 Introducing the System .............................. 1–1
1.1 Brief Description of the VCP 20....................................... 1–1
1.2 Operating System............................................................ 1–2
1.3 Commissioning ................................................................ 1–2
2 Important Directions for Use...................... 2–1
2.1 Appropriate Use............................................................... 2–1
2.1.1 Introduction ................................................................... 2–1
2.1.2 Areas of Use and Application ....................................... 2–2
2.2 Inappropriate Use ............................................................ 2–2
3 Safety Instructions for Electric Drives and
Controls ....................................................... 3–1
3.1 Introduction...................................................................... 3–1
3.2 Explanations .................................................................... 3–1
3.3 Hazards by Improper Use................................................ 3–2
3.4 General Information......................................................... 3–2
3.5 Protection Against Contact with Electrical Parts.............. 3–4
3.6 Protection Against Electric Shock by Protective Low
Voltage (PELV)................................................................ 3–5
3.7 Protection Against Dangerous Movements ..................... 3–6
3.8 Protection Against Magnetic and Electromagnetic Fields
During Operation and Mounting ...................................... 3–7
3.9 Protection Against Contact with Hot Parts....................... 3–8
3.10 Protection During Handling and Mounting....................... 3–9
3.11 Battery Safety .................................................................. 3–9
3.12 Protection Against Pressurized Systems....................... 3–10
4 Technical Data............................................. 4–1
4.1 Front Panel and Enclosure .............................................. 4–1
4.2 Keyboard ......................................................................... 4–1
4.3 Display............................................................................. 4–2
4.4 Electrical Data ................................................................. 4–2
4.5 Interfaces......................................................................... 4–3
4.6 Central Processing Unit and Memory.............................. 4–3
4.7 Connection System ......................................................... 4–4
4.8 Environmental Conditions................................................ 4–5
4.9 Applied Standards and Guidelines .................................. 4–6
4.10 Compatibility Test ............................................................ 4–7
5 Dimensions.................................................. 5–1
5.1 Installation ....................................................................... 5–1
5.1.1 Front Panel Dimensions ............................................... 5–2
Courtesy of CMA/Flodyne/Hydradyne ▪ Motion Control ▪ Hydraulic ▪ Pneumatic ▪ Electrical ▪ Mechanical ▪ (800) 426-5480 ▪ www.cmafh.com