7-4 Bosch Rexroth AG | Electric Drives and Controls Rexroth IndraControl VCP 20 | R911310381 / 02
Interfaces
7.2 Serial Interfaces
The universal interface X6 combines several interface standards into
one connector. The connector is divided into two channels. The chan-
nel for the communication (SER1) is operated separately from the
channel for the logging printer/scanner (SER2).
Due to the protocol, only one of the two interface standards can be
used for the communication channel (SER1).
Fig. 7-5: Rear view RS422 / RS485 / RS232
Courtesy of CMA/Flodyne/Hydradyne ▪ Motion Control ▪ Hydraulic ▪ Pneumatic ▪ Electrical ▪ Mechanical ▪ (800) 426-5480 ▪ www.cmafh.com
To Next Page
Loading...
