Bosch Rexroth IndraControl VCP 20.2 - Identification; Fig. 8-1: Nameplate (Example)

8-2 Bosch Rexroth AG | Electric Drives and Controls Rexroth IndraControl VCP 20 | R911310381 / 02
Maintenance and Installation
8.5 Identification
You can identify the small operator terminal by the nameplate on the
rear.
Fig. 8-1: Nameplate (example)
1 Ordering name / Short type designation
2 Part number
3 Voltage and power specification
4 Serial number
Courtesy of CMA/Flodyne/Hydradyne ▪ Motion Control ▪ Hydraulic ▪ Pneumatic ▪ Electrical ▪ Mechanical ▪ (800) 426-5480 ▪ www.cmafh.com