1-2 Bosch Rexroth AG | Electric Drives and Controls Rexroth IndraControl VCP 20 | R911310381 / 02
Introducing the System
1.2 Operating System
The Windows CE operating system is installed on the small operator
terminal.
1.3 Commissioning
Mount the device properly (for more information, see chapter Dimen-
sions). Then connect the device to the voltage supply and to the control
unit or the field bus system, if required.
Courtesy of CMA/Flodyne/Hydradyne ▪ Motion Control ▪ Hydraulic ▪ Pneumatic ▪ Electrical ▪ Mechanical ▪ (800) 426-5480 ▪ www.cmafh.com
To Next Page
Loading...
