Bosch Rexroth IndraControl VPB 40.3 - Fan Exchange Procedure

1
2
3
① Knurled screw of the fan tray
② Fan plug connection
③ CMOS battery
Fig. 14-2: Fan tray
Risk of injury by rotating fan impeller!
CAUTION
Do not touch the fan impeller with your hands and ensure that it does not come
into contact with other objects.
Exchanging the fan
1. Disconnect the control cabinet PC.
2. Loosen the knurled screw.
3. Carefully remove the fan (including the fan cover).
4. Remove the supply cable of the fan from the board of the control cabinet
PC.
5. Connect the supply cable of the new fan to the board of the control cabi-
net PC.
6. Install the new fan.
Control Cabinet PC
Bosch Rexroth AG
Maintenance
DOK-SUPPL*-VPB*40.3***-IT05-EN-P
47/57