Bosch Rexroth IndraControl XM42 - 8 Standards; Standards Used

Voltage dips at current supply interfaces PS2 < 10 ms, evaluation criterion A
Electrical isolation
24 V supply (U
LS
) to the functional earth
Separation between 0 V of the U
LS
and FE (hous-
ing)
Tab. 7-2: Operating voltage and current consumption
Electronic damage due to polarity reversal or
due to a nominal current that is too low
NOTICE
The power supply unit has to be able to deliver the quadruple nominal current of
the protective fuse to ensure that the fuse reliably triggers in case of an error.
8 Standards
The products have been developed according to the German edition of the
standards published at the time of product engineering.
8.1 Standards used
Norm
Standard
Norme
Bedeutung
Meaning
Signification
Ausgabe
Edition
Édition
DIN EN 60204-1 Sicherheit von Maschinen
Elektrische Ausrüstung von Maschinen
–
Safety of machinery
Electrical equipment of machines
–
Sécurité des machines
Equipement électrique des machines
2007
DIN EN 61131-2 Speicherprogrammierbare Steuerungen
Teil 2: Betriebsmittelanforderungen und Prüfungen
–
Programmable controllers
Part 2: Equipment requirements and tests
–
Automates programmables
Partie 2: Spécifications et essais des équipements
2008
IndraControl XM42 Controls 11/65
Standards
R911345566_Edition 03 Bosch Rexroth AG