Bosch Rexroth IndraControl XM42 - 9 Interfaces; 9.1 Connection position

9 Interfaces
9.1 Connection position
1
2
3
4
5
6
7 8
12
11
13
14
9 10
Fig. 9-1: Interfaces
Attaching and detaching connections under
voltage can damage the control!
NOTICE
Switch off the supply voltage before attaching or detaching any connections!
No.
Name Connection type Connector type
(Integrated)
Mating connector and cable
(From outside)
① XD1 24 V plug
U
LS
4-pin (4-wire)
② – Extension bus Bus base
32-pin
Bus base for extension mod-
ules
32-pin
③ XF5 Ethernet
(TCP/IP, RT Ethernet)
RJ-45 socket
8-pin
RJ-45 plug
(twisted pair, 4-/8-wire)
14/65
Interfaces
IndraControl XM42 Controls
Bosch Rexroth AG R911345566_Edition 03