12.2.1 License information
To open the license conditions, select the directory "/INITFW/Licenses/" in the
file manager of the web application "First Touch".
This product contains software components that are licensed by the holder of
the rights under GNU General Public License (GPL), GNU Lesser General Public
License (LGPL) or any other Open Source Software license, which requires that
source code be made available.
The source code of these software components is already delivered together
with this product. You can obtain the source code for these software compo-
nents on a physical medium (CD or DVD) by submitting a written request to our
open source office address listed below or by sending an email to
email>open.source@boschrexroth.de. When sending such a request, please
name the relevant product and the date of purchase of the same.
Bosch Rexroth AG
Open Source Office
Zum Eisengießer 1
97816 Lohr am Main
Germany
We may charge you a fee (up to max. 20,- €) to cover the cost of physical media
and processing.
You may send your request (i) within three (3) years from the date you received
the product that included the binary that is the subject of your request or (ii) in
the case of code licensed under the GPL v3 for as long as Bosch Rexroth offers
spare parts or customer support for that product.
12.2.2 LED states
For the initial firmware, the LEDs indicate the following function states:
LED
Function Color Status
DIA2 Store CoreDump on SD card
or USB (for diagnostic purpo-
ses)
Green/orange flashing In process
Green Done
Red Errors
DIA3,
DIA4
Operating system state Alternatingly red flashing Initial firmware is active
ERR Reset to delivery state Red Function is selected, pro-
cessed
Flashing red Confirm selection
BT Reset user name and pass-
word
Red Function is selected, pro-
cessed
Flashing red Confirm selection
IndraControl XM42 Controls 41/65
Device description
R911345566_Edition 03 Bosch Rexroth AG
To Next Page
Loading...
