EasyManua.ls Logo

Bosch Rexroth IndraControl XM42 - 12.3 IndraControl First Touch

Bosch Rexroth IndraControl XM42
72 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7. If the right LED row is red, the update was not successful. Start the update
again.
12.3 IndraControl First Touch
The "IndraControl First Touch" commissioning application interactively commis-
sions and maintains controls of the IndraControl XM generation. The commis-
sioning application can be reached via the IP address of the control and can run
on most of the current web browsers. To open the setup application, enter the
following IP addresses:
The IP address of the connection XF1 (Ethernet interface) on the control is
192.168.1.1 upon delivery. This IP address can be changed.
The IP address of the connection XF31 (USB device interface) on the control
is 192.168.234.234. This IP address cannot be changed.
The "IndraControl First Touch" commissioning tool is only available
in English.
Supported web browsers:
Chrome 3+
Firefox 9+
Internet Explorer 10+
The First Touch website communicates via the encrypted https protocol. Enter
the URL (https://192.168.1.1/ or https://192.168.234.234), confirm the respec-
tive security certificate and add an exception rule. The website can then be loa-
ded.
After loading the First Touch website, a "Welcome" page is displayed. To navi-
gate to another First Touch site, a user login is required. To log in, enter user
name and password into both the form fields of the navigation bar.
The default user ID is:
User name: boschrexroth
Password: boschrexroth
IndraControl XM42 Controls
45/65
Device description
R911345566_Edition 03 Bosch Rexroth AG

Table of Contents

Related product manuals