Required qualification: Individual who is able to assess the tasks assigned and
to identify possible safety risks owing to qualification in the subject, knowledge
and experience. The individual should also be familiar with the standards and
regulations.
1.2 Scope
This operating instructions is valid for all variants of the control, whose type co-
des start with:
XM42...
The type code specifications are located on the type plate of the device, also re-
fer to chapter 2 "Product identification and scope of delivery" on page 3.
1.3 Related documents
Title Part number and document type
IndraControl S20:
System and Installation
R911335988
Application Description
IndraControl S20:
Diagnostic Tabs and Error Messages
R911344826
Application Description
IndraControl XFE 01.1
Extension Modules Profibus, RT-Ethernet, Sercos,
CAN
R911345570
Operating Instructions
Tab. 1-2: Related documents
The XM4x controls are provided as function package with the systems
IndraMotion MLC and IndraMotion MTX. The ordering data (type code, part
number) differ according to the selected function package (system functions).
The hardware characteristics described in this document apply to all available
function packages. For more information on the function packages, refer to the
respective system descriptions.
For related documents, go to the "Rexroth Media Directory" at http://
www.boschrexroth.com and enter the specified part number.
1.4
Customer feedback
Customer requests, comments or suggestions for improvement are of great im-
portance to us. Please email your feedback on the documentations to Feed-
back.Documentation@boschrexroth.de. Directly insert comments in the elec-
tronic PDF document and send the PDF file to Bosch Rexroth.
2/65
About this documentation
IndraControl XM42 Controls
Bosch Rexroth AG R911345566_Edition 03
To Next Page
Loading...
