Short type designation 1 2 3 4 5 6 7 8 9
1
0 1 2 3 4 5 6 7 8 9
2
0 1 2 3 4 5 6 7 8 9
3
0 1 2 3 4 5 6 7 8 9
4
0
Example: C D B 0 2 . 1 B - E T - E C - E C - E M - L 3 - L 3 - E M - N N - F W
① ② ③④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑩ ⑪ ⑫ ⑬
⑪ Interface 6:
NN = Not equipped
EC = Multi-encoder interface
7)
EM = Encoder emulation
8)
DA = Digital/analog I/O extension
⑫ Other design:
NN = None
⑬ Firmware:
FW = Firmware must be ordered as a separate subposition
1) The L3, S4, S5 and SB interfaces guarantee both the function
and the certification
2) Only if interface 4 = NN
3) Only if interface 4 = L3
4) Only if interface 4 = S4
6) Only if interface 4 = SB
7) Only if interface 3 = PB or EC
8) Only if interface 3 = PB, EC or EM
Tab. 5-12: CDB02 type code
The figure illustrates the basic structure of the type code. Our
sales
representative will help you with the current status of availa‐
ble versions.
Bosch Rexroth AG DOK-INDRV*-CXX02******-PR03-EN-P40/143
IndraDrive Control Sections CSB02, CSE02, CSH02, CDB02
Rexroth IndraDrive control sections
Courtesy of CMA/Flodyne/Hydradyne ▪ Motion Control ▪ Hydraulic ▪ Pneumatic ▪ Electrical ▪ Mechanical ▪ (800) 426-5480 ▪ www.cmafh.com
To Next Page
Loading...
