7-56 Operating Modes MPH-02, MPB-02, MPD-02
DOK-INDRV*-MP*-02VRS**-FK01-EN-P
Relative Positioning Block with Residual Path Storage after
Interrupting with Jog mode
Interrupted relative positioning block with residual path storage after jog
mode with target position = 600 without overrunning the target
position while jogging
Positioning is always continued at the current actual position value.
An interruption by means of jogging or positioning stop clears the residual
path memory.
Note: The incremental dimension reference is no longer ensured!
Example
Reference Position
Behavior
Courtesy of CMA/Flodyne/Hydradyne ▪ Motion Control ▪ Hydraulic ▪ Pneumatic ▪ Electrical ▪ Mechanical ▪ (800) 426-5480 ▪ www.cmafh.com
To Next Page
Loading...
