Bosch rexroth M1-16 Series - Personal Protective Equipment

14/54 Control blocks for mobile applications | Safety instructions
Bosch Rexroth AG, RE 64025-B/2021-08-12
CAUTION
Contact with hydraulic fluid!
Danger tohealth / damage tohealth, e.g. eye injury, skin damage, toxication
inthe event ofinhalation!
 Avoid any contact with hydraulic fluids.
 When handling hydraulic fluids, thesafety instructions ofthelubricant
manufacturer need tobe observed atall times.
 Use your personal protective equipment (e.g. safety goggles, safety gloves,
suitable working clothes, safety shoes).
 Immediately seek medical attention, however, ifhydraulic fluid gets into your
eyes orblood circuit orif you swallow itaccidentally.
Escaping hydraulic fluid through leaking machine/system components!
Risk ofburning and risk ofinjury due toescaping hydraulic fluid jet!
 Depressurize therelevant machine/system component and repair theleak.
 Never attempt toblock orseal theleak orhydraulic fluid jet with acloth.
Danger from improper handling!
Slip hazard! When using the control block asclimbing aid, there isadanger
ofslipping onwet and/or fluid-afflicted surfaces.
 Never use the control block ashandle orstep.
 Check how tosafely get ontop ofthemachine/system.
2�7 Personal protective equipment
The personal protective equipment is the responsibility of the user of the control
block. Observe thesafety regulations inyour country.
All pieces ofpersonal protective equipment should be intact.