Bosch rexroth M1-16 Series - Disposal

44/54 Control blocks for mobile applications | Disposal
Bosch Rexroth AG, RE 64025-B/2021-08-12
12 Disposal
CAUTION
Spring-loaded components!
Risk ofinjury due toejected components during disassembly ofthe valve into its
individual parts!
 Loosen screwed-in and spring-loaded components slowly and keep secured
until the compression spring isrelieved.
Careless disposal of the control block, the hydraulic fluid and the packaging
material can result in environmental pollution.
For the disposal of the control block, observe the following points:
1� Drain the control block completely.
2� Dispose of the control block and the packaging material in accordance with the
national regulations of your country.
3� Dispose ofthe hydraulic fluid inaccordance with the regulations ofyour
country.
4� Disassemble the control block into its individual parts and recycle them.
5� For example, separatethe parts into:
– Metals
– Electronic waste
– Plastic