Bosch rexroth M1-16 Series - Troubleshooting; Troubleshooting Approach

46/54 Control blocks for mobile applications | Troubleshooting
Bosch Rexroth AG, RE 64025-B/2021-08-12
14 Troubleshooting
Table 8 isintended tosupport troubleshooting. This table isnot exhaustive.
Issues may occur inpractice that are not listed here.
Only authorized personnel may perform troubleshooting inside asafety area
designated by the machine manufacturer.
14�1 How toproceed fortroubleshooting
 Use asystematic and targeted approach, even when pressed fortime. Random
and imprudent removal and changing ofsettings could result inthe inability
toascertain the original error cause.
 First, make yourself familiar with the function of the control block in
conjunction with the entire system.
 Find out whether or not the control block rendered the required function in the
entire system before the fault occurred.
 Collect the changes to the entire system in which the control block is installed:
– Have there been any changes tothe application conditions oroperating range
oftheproduct?
– Has maintenance work recently been carried out? Is there an inspection
ormaintenance log?
– Have any changes (e.g.upgrades) orrepairs been made tothe overall system
(machine, electrics, control) ortothe product? If yes: What changes?
– Has thehydraulic fluid been changed?
– Has theproduct ormachine been used asintended?
– How does themalfunction appear?
 Try toget aclear idea ofthecause ofthefault. Directly ask the(machine)
operator.
 Document thework carried out.
 If thefault cannot be corrected, please refer toone ofthecontract addresses
at: https://addresses.boschrexroth.com orinchapter10.5 "Spare part".