EasyManua.ls Logo

Bosch rexroth M1-16 Series - Page 6

Bosch rexroth M1-16 Series
54 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6/54 Control blocks for mobile applications | About this documentation
Bosch Rexroth AG, RE 64025-B/2021-08-12
Table 1: Required and supplementary documentation
Title Document number Document type
Flow sharing control block M6-15 64321
Flow sharing control block M6-22 64322
Flow sharing control block M7-20 64293
Flow sharing control block M7-22 64295
Flow sharing control block M7-25 64297
Flow sharing control block RS12 64133
Flow sharing control block RS14 64136
Flow sharing control block RS15 64134
Flow sharing control block RS20 64137
Flow sharing control block SX 10 64132
Flow sharing control block SX 12 64128
Flow sharing control block SX 14 64125
CAN-controlled pilot module CPM-1x
CANopen standard communication
64820-B Instruction manual
CAN-controlled pilot module CPM-1x
CANopen special communication
64819-B Instruction manual
Spool position sensor PSM 95190-B Instruction manual
Order confirmation
Contains the order-related technical data ofthe control block.
Order confirmation
Offer drawing
Contains the outer dimensions, all connections and the hydraulic
circuit diagram ofthe control block.
Offer drawing
Hydraulic fluids based onmineral oils and related hydrocarbons
Describes therequirements for hydraulic fluids onmineral oil basis
and related hydrocarbons foroperation with Rexroth hydraulic
components and provides support for selection ofsuitable hydraulic
fluids for thehydraulic system.
90220 Datasheet
Environmentally acceptable hydraulic fluids
Describes the requirements forenvironmentally acceptable hydraulic
fluids onmineral oil basis and related hydrocarbons foroperation
with Rexroth hydraulic components, and provides support
forselection ofsuitable hydraulic fluids forthe hydraulic system.
90221 Datasheet
Reliability parameters MTTF
D
for the functional safety
accordingtoISO13849
MTTF
d
values for control blocks
90290 Datasheet
The related documentation can be obtained where necessary from Rexroth via
www.boschrexroth.com/mobile-hydraulics-catalog.

Table of Contents

Related product manuals