Bosch Rexroth M4-12 - General instructions on damage to property and the product; Housing and parts; Flange surfaces and sealing surfaces; Vise

12/32 General instructions on damage to property and the product
Bosch Rexroth AG, M4-12, RE 64276-01-R/10.2017
3 General instructions on damage to
property and the product
The warranty only applies to the delivered configuration.
Entitlement to warranty claims is void due to
• incorrect assembly, commissioning and operation,
• improper use,
• removal of tamper-proof caps and seals (e.g. with pressure settings),
• adjustment of the factory settings provided on delivery,
• modifications and extensions,
• opening the valve,
• improper handling,
• Using spare parts that are not original spare parts from Rexroth.
• Only original parts from Rexroth may be used.
• Replace elastic seal elements with new ones after removing.
• The housing and parts must be clean and undamaged.
• Damaged housings and parts may no longer be used.
• Reworking threads is not permissible.
• Reworking holes is not permissible.
• Prevent dirt from entering holes and threads.
• Adhesion forces may act between the flange surfaces during disassembly.
• Remove soiling with a sharpening stone and clean with an oil-soaked cleaning
cloth.
• Surfaces with impressions or traces of wear in the sealing surface may no longer
be used.
• Reworking the sealing surfaces is not permissible.
• Protective braces with hard rubber must be used. Sealing and flange surfaces must
not be damaged.
• Oil-soaked cleaning cloth
• Sharpening stone
• Mechanics' tool
• Torque wrench
• Rexroth repair case
– Assembly-disassembly brushes
– Special socket wrench
– Tool
Housing and parts
Flange surfaces and
sealing surfaces
Vise
Tools required