6/32 About this manual
Bosch Rexroth AG, M4-12, RE 64276-01-R/10.2017
1.3.2 Symbols
The following symbols indicate information that is not directly relevant to safety but
increases understanding of the manual.
Table 3: Meaning of the symbols
Symbol Meaning
If this information is disregarded, the product cannot be used or operated
to its optimum potential.
▶
Single, independent step
1.
2.
3.
Numbered instruction:
The numbers indicate that the steps must be completed one after the
other.
Black circle with white number:
Markings for better understanding.
White circle with black number: Item or assembly with a reference to the
parts list and to the graphics within a section.
White circle with black letters: Assembly with reference to the parts list
and the graphics within a section.
White circle with black Roman numeral:
Variants
Views
1.3.3 Designations
This documentation uses the following designations:
Table 4: Designations
Designation Meaning
M4-12 Directional valve
KBPS Proportional pressure relief
1.3.4 Abbreviations
This manual uses the following abbreviations:
Table 5: Abbreviations
Abbreviation Meaning
IP Inlet Plate
PRV Pressure Relief Valve
EP End Plate
IPC Individual Pressure Compensator
FDP Fixed Displacement Pump
LS Load Sensing
SOV Shut-Off Valve
VP Variable Pump
To Next Page
Loading...
