Pin Signal designation Pin Signal designation
7 RTS - Ready To Send 8 CTS - Clear To Send
9 NC
Fig.9-19: Pin assignment INTERBUS diagnosis interface X64 (RS232 C)
Pin Signal designation Pin Signal designation
1 DO 2 DI
3 COM 4 GND
5 +5V 6 DO
7 DI 8 Vcc
9 RBST
Fig.9-20: Pin assignment INTERBUS interface X60 (remote bus)
120/135 Bosch Rexroth AG | Electric Drives
and Controls
Rexroth MTA 200 | Project Planning Manual
PLC Modules MTS-P01.2 and MTS-P02.2
To Next Page
Loading...
