Bosch Rexroth MTA 200 - Page 70

Primary / Secondary Master / Slave
Type Primary Master: Auto
Primary Slave: None
Secondary Master: Auto
Secondary Slave: None
CHS Format
Cylinders Display depends on the IDE device
Heads Display depends on the IDE device
Sectors Display depends on the IDE device
Maximum Capacity Display depends on the IDE device
LBA Format
Total Sectors Display depends on the IDE device
Maximum Capacity Display depends on the IDE device
Multi-Sector Transfer Display depends on the IDE device
LBA Mode Control Display depends on the IDE device
32-bit I/O Enabled
Transfer Mode Display depends on the IDE device
Ultra DMA Mode Display depends on the IDE device
Fig.5-7: "IDE Device" submenu
Memory Shadow
CC00 - CFFF Disabled
D000 - D3FF Disabled
D400 - D7FF Disabled
D800 - DBFF Disabled
DC00 - DFFF Disabled
Fig.5-8: "Memory Shadow" submenu
Memory Cache
Memory Cache Enabled
Cache System BIOS area Write Protect
Cache Video BIOS area Write Protect
Cache Extended memory area Write Back
CC00 - CFFF Disabled
D000 - D3FF Disabled
D400 - D7FF Disabled
D800 - DBFF Disabled
DC00 - DFFF Disabled
Fig.5-9: "Memory Cache" submenu
68/135 Bosch Rexroth AG | Electric Drives
and Controls
Rexroth MTA 200 | Project Planning Manual
PC CPU Configuration -45