Bosch Rexroth MTA 200 - Page 71

Advanced Menu
Advanced Chipset Control Submenu
PNP OS installed No
Reset Configuration Data No
Secured Setup Configuration Yes
PCI Configuration Submenu
PS/2 mouse Autodetect
Keyboard Features Submenu
I/O Device Configuration Submenu
Large Disk Access Mode DOS
SMART Device Monitoring Enabled
Halt On Errors Yes
Fig.5-10: Advanced menu
Advanced Chipset Control
Graphics Aperture 64
Enabled memory gap Disabled
ECC Config Disabled
SERR signal condition None
8 bit I/O Recovery 4.5
16 bit I/O Recovery 4.5
Fig.5-11: "Advanced Chipset Control" submenu
PCI Configuration
PCI IRQ line 1 Auto Select
PCI IRQ line 2 Auto Select
PCI IRQ line 3 Auto Select
PCI IRQ line 4 Auto Select
PCI/PNP ISA UMB Region Exclusion Submenu
PCI/PNP ISA IRQ Resource Exclusion Submenu
Default Primary Video Adapter AGP
ISA graphics device installed No
Assign IRQ to PCI VGA No
Fig.5-12: "PCI Configuration" submenu
PNP/UMB Region Exclusion
CC00 - CFFF Available
D000 - D3FF Reserved
D400 - D7FF Available
D800 - DBFF Available
DC00 - DFFF Available
Fig.5-13: "PCI/PNP UMB Region Exclusion" submenu
Project Planning Manual | Rexroth MTA 200 Electric Drives
and Controls
| Bosch Rexroth AG 69/135
PC CPU Configuration -45