Bosch Rexroth MTA 200 - Page 81

Advanced Menu
APIC – IO APIC Mode: Disabled
I/O Device Configuration Submenu
Advanced Chipset Control Submenu
Video (Intel IGD) Control Sub-Menu Submenu
Cache Memory Submenu
PCI Configuration Submenu
Fig.6-10: Advanced menu
I/O Device Configuration
Serial port A: Enabled
Base I/O address: 3F8
Interrupt: IRQ4
Serial port B Enabled
Mode: Normal
Base I/O address: 2F8
Interrupt: IRQ3
Serial Port C Enabled
Base I/O address: 3E8
Interrupt: IRQ10
Serial Port D Enabled
Mode: Normal
Base I/O address 2E8
Interrupt: IRQ11
External Parallel Port Enabled
Base I/O address: 378
Interrupt: IRQ7
Mode: Bi-Directional
Floppy disk controller Enabled
External Diskette Controller Disabled
Watchdog timeout: Disabled
Fig.6-11: "I/O Device Configuration" submenu
Advanced Chipset Control
Legacy USB Support Enabled
USB support Enabled
USB 2.0 functionality Disabled
IDE Controller Enabled
Local Bus IDE adapter Both
Native IDE Support Disabled
AC97 Audio Device Disabled
Project Planning Manual | Rexroth MTA 200 Electric Drives
and Controls
| Bosch Rexroth AG 79/135
PC CPU Configuration -55