Electric Drives
and Controls
1−9Bosch Rexroth AGBT 6.001070080078 / 03
Safety Instructions
1.8 Operating the product
DANGER
One has to expect that magnetic fields are present in the vicinity
of resistance welding systems, which are above the limits speci-
fied in VDE 0848 Part 4. In particular, the limits for extremities can
be exceeded if manual guns are used.
In cases of doubt, please measure the field strength and provide
additional measures to ensure health and safety at work. Please
note the Instructions BGV B11, “Accident prevention regulation
relating to electromagnetic fields” issued by the Berufsgenos-
senschaft (employers’ third party liability insurance association).
DANGER
Due to the strong magnetic fields arising from resistance welding,
the function of cardiac pacemakers may be disturbed. This may
cause the death or considerable health damages!
Therefore, these persons should avoid the welding system.
We recommend posting a warning to DIN 40023 at all entrances to
factory halls containing resistance welding equipment:
No entry for persons with cardiac
pacemakers!
Danger!
DANGER
Danger of injuries and damage to property through operation of
units outside their intended cabinets!
The units are designed to be installed in housings or switch cabi-
nets and must not be operated unless they have been installed in
such housings and with the cabinet door closed!
To Next Page
Loading...
