Electric Drives
and Controls
1−13Bosch Rexroth AGBT 6.001070080078 / 03
Safety Instructions
1.12 CE Marking
CAUTION
The CE mark for the described combination of devices is applica
ble for use in industrial environments.
For other combinations/applications, the certificate must be de-
rived from the above requirements, or a new certificate must be is-
sued, if necessary. This is the responsibility of the line supplier/
user.
The product described corresponds to an application variant
which is not covered by the provisions concerning end user prod
ucts, machines or systems based on its very nature. Therefore, it
may only be operated as described above.
The evaluation of the electrical and mechanical safety, the envi-
ronmental influences (foreign bodies, moisture) must be carried
out on the final product in encased state.
When installed in an enclosure, the EMC properties of this product
may be subject to change. For this reason, the final product (end-
user device, machine, systems) should be subjected to a verifica-
tion of its EMC characteristics by the end product manufacturer.
To Next Page
Loading...
