Electric Drives
and Controls
4−1Bosch Rexroth AGBT 6.001070080078 / 03
Operation
4 Operation
The BT 6 gives you access to important user- and control-specific data
of the production process (e.g. display/modification of welding parame-
ters, reset counters after electrode change, display of I/O signals pres-
ent, etc.).
CAUTION
Possibility of damages to the system or the workpiece!
Do not change any data without reason. All data will be transmitted
online to the weld timer. Incorrect data settings may cause dam-
ages to the system or the workpiece!
To Next Page
Loading...
