Electric Drives
and Controls
4−5Bosch Rexroth AGBT 6.001070080078 / 03
Operation
D FPO (freely programmable output). Options:
− Activate / deactivate the output
− Display and change on/off times
D Control mode. Options:
− Display and change of control mode
D Sequence setup. Options:
− -Display the timer type and firmware version
− Turn sequence inhibition on / off, globally for all schedules
− Turn ”weld internal” on / off, globally for all schedules
− F6 function key for direct selection
D Setup BT. Options:
− Display the control terminal type and firmware version
− Set the LCD contrast
− Set the language
− Display and change code numbers
To Next Page
Loading...
