4−6 Electric Drives
and Controls
Bosch Rexroth AG BT 6.00 1070080078 / 03
Operation
4.3 Selection of main menu items and navigation in sublevels
L Proceed as follows:
1. Press
key.
2. Move the cursor to the desired line with the keys
or .
3. Press
key.
The BT 6 changes to the selected sub-level.
The display structure may be different in the individual sublevels. As a
rule, a sublevel may consist of one or several screens in which data can
be displayed, selected and changed, if necessary.
D In order to get to the next/previous screen within a sublevel:
Use
or key.
D In order to move the cursor by lines within a screen:
Use
or key.
D To change data:
Set cursor to the line of the input field. Then use numerical keys,
.
,
+
or
−
keys.
D To confirm data changes:
Press
key.
D To abort data changes:
Press
key.
L You may press the
key at any time in order to go back from any screen
to the highest menu level
− or −
press the
key in order to return to the previous menu level.
. In order to get to the individual screens of a sublevel without any
detours, you may also use Quick Mode.
For more information on Quick Mode, refer to section 4.4.
To Next Page
Loading...
