Bosch Rexroth PS6000 - Page 40

4−10 Electric Drives
and Controls
Bosch Rexroth AG BT 6.00 1070080078 / 03
Operation
Active range Parameter numberDescription
(alternative description)
Reference curr. 1.Wld
Commanded current 1.Wld
76
Actual current 1.Wld 77
%heat 1.Wld 78
2.Weld time (weld current time): −
Reference curr. 2.Wld
Commanded current 2.Wld
79
Actual current 2.Wld 80
%heat 2.Wld 81
3.Weld time (post-heating weld time): −
Reference curr. 3.Wld
Commanded current 3.Wld
82
Actual current 3.Wld 83
%heat 3.Wld 84
Correction Heat corr. schedule 85
Pressure corr. sched 86
Heat corr. electrode 87
Pressure corr. elect 88
Sequence setup Show type of timer 89
Weld/no weld (timer) 90
Start-Inhibit timer 91
Setup BT Show type of BT6 92
LCD contrast 93
Select language 94
Mains frequency 50/60 Hz 95
Regulation mode Reg. mode 96
Reg. 1.weld 97
Reg. 2.weld 98
Reg. 3.weld 99
Spot repeating 100
Not used 101 to 110
FPO (freely program-
mable output)
Free program. output (on/off) 111
Only if FPO = On: −
1.Offtime 112
1.Ontime 113
2.Offtime 114
2.Ontime 115
3.Offtime 116
3.Ontime 117