Bosch Rexroth RE 90300-B - Page 28

28/64 Axial piston units | Transport and storage
Bosch Rexroth AG, RE90300-B/2021-01-19
BoschRexroth recommends the following procedure:
1. Clean the axial piston unit; see chapter 10.1 "Cleaning and care" on page 47.
2. Drain the axial piston unit.
3. For storage times up to 12 months: Moisten the inside of the axial piston unit
with mineral oil and fill with approx. 100 ml mineral oil.
For storage times up to 24 months: Fill the axial piston unit with VCI 329
corrosion protection (20 ml).
The unit is filled through the drain port.
4. Plug all ports so they are airtight.
5. Coat unpainted areas of the axial piston unit with mineral oil or suitable,
easilyremovable corrosion protection, e.g.acid-free grease.
6. Pack the axial piston unit with desiccant airproof in corrosion protection film.
7. Store the axial piston unit in ashock-proof manner; see "Requirement"
onpage 26 in this chapter.