6−20 Electric Drives
and Controls
Bosch Rexroth AG RhoMotion 1070072367 / 04
SERCOS interface
Configuration of the parameter
Bit 0: Feedback type
0: rotative
Bit 1: Distance coded measuring
0: no distance coded
1: distance coded
(S−0−0165,S−0−0166)
system
1: linear
reference marks
reference marks
Bit 3: Motion meaning
0: not inverted
1: inverted
Bit 5: Configuration distance coded
measuring system
0: Count direction positive
1: Count direction negative
Bit 7: Absolute value reporting
x0: no absolute value reporting
possible (bit 7 not relevant)
01: Absolute value reporting allowed
11: Absolute value reporting possible
(encoder is treated as an abso-
lute encoder)
but not allowed
S−0−0117 Feedback 2 resolution
This parameter indicates the resolution of the external encoder.
This value means:
D With rotative encoders the number of divide periods or cycles per ro-
tation of the encoder shaft (DP/rotations)
D With linear motors the resolution in mm (mm/bar division)
D With resolver the number of pairs of poles of the resolver
The meaning of the value of S−0−0117 is determined by S−0−0115, po-
sition feedback 2 type (rotative or linear encoder).
Because for paramerization of the external encoder no own parameter
for gearfactor and feedconstant are available, both values must be inc-
luded in the calculation of S−0−0117.
To Next Page
Loading...
