Bosch Rexroth Rho 4.0 - Page 28

3−6 Electric Drives
and Controls
Bosch Rexroth AG RhoMotion 1070072367 / 04
Structure of the rho4.0
PHG2000-Display ’Floppy management’
With the PHG mode 9.8 (Floppy management) the following PHG2000
display is switched on:
Floppy management
GrdStel2.ird 2664331 20.09.00 10:06
GrdStel2.pkt 64322 18.09.00 18:12
GrdStel2.qll 4313 17.06.00 19:34
Palpos01.ird 64394 10.11.99 09:54
Palpos02.ird 84385 11.11.99 11:11
Palpos05.pkt 5376 05.09.00 17:09
Pal1 .pkt 5376 05.09.00 17:09
Pal2 .pkt 6357 08.11.00 13.08
Pal12 .pkt 12356 12.10.99 16.16
Pal22 .pkt 23466 04.05.98 15.43
MB total: 1.406 occupied: 1.354 free: 0.002
Delete
FD
Copy
MP −> FD
Copy
XMP −> FD
Copy
FD −> rho
If the PHG2000 display ’Floppy management’ is active, the uppermost
key row of the PHG2000 is used as function keys in the standard key as-
signment.
The following functions are started with it:
D ”Delete FD file” (key code ’MOVE’)
D ”Copy machine parameters from rho onto floppy” (key code ’LI-
NEAR’)
D ”Copy extended machine parameters from rho onto floppy”) (key
code ’VIA’)
D ”Copy files from floppy onto rho”) (key code ’TO’)