Bosch Rexroth Rho 4.0 - Page 29

Electric Drives
and Controls
3−7Bosch Rexroth AGRhoMotion1070072367 / 04
Structure of the rho4.0
Key assignment for selection
The following key combinations correspond to the cursor movements
within the file list of the display:
Standard keyboard assignment
<up arrowl> : move cursor up <Shift> <5>
<down arrow> : move cursor down <Shift> < . >
< ’<’ > : move cursor up by a page <Alt> <7>
< ’>’ > : move cursor down by a page <Alt> <8>
<BEGIN> : position cursor at the beginning
of the file list
<BEGIN>
<END> : position cursor at the end of the
file list
<END>
<’[’> : set mark (beginning of an area) <Alt> <WENN>
<WDH> : Update display (Refresh list) <WDH>
<left arrow> : Quit operating mode
file management
<Shift> <1>
The inversely represented file(s) is/are selected for the function key to be
confirmed. Any large, coherent area over several pages can be selec-
ted. The processing of a selected area (file list) is interrupted with <left
arrow>.
CAUTION
The disk may not be removed from the drive during a write ac-
cess.
It can destroy (logically) the disk.