Electric Drives
and Controls
4−7Bosch Rexroth AGRhoMotion1070072367 / 04
PCLrho4.0
L Click on the checkbox next to ’Insert modules from other project’ to adopt
a PCL program that is already existing.
L Via browser adjust the path of the already existing PCL program.
L Actuate the button ’Finish’ to get back into the project settings of
WinSPS.
The control ’PCLrho4.0’ is characterized through the identification R40
in the WinSPS project.
. In the project R4EN_4B.PRJ a program with the identification
R4EN_4B.R40 has been already created
To Next Page
Loading...
