Bosch rexroth SB24 - Page 21

Repairing the flange surface 21/24
RE 66170-10-R/2019-05-15, control block SB24/34, BoschRexrothAG
5. Align the shuttle valve with the spherical sealing cup toport Y and insert
without jamming.
6. Check the distance dimension 0.5mm from the flange surface ofthe control
block segment tothe upper edge ofthe inserted shuttle valve.
7. Insert anew O-ring
into port Y.
NOTICE! The shuttle valve
must remain freely moveable within the O-ring .