22/36 Digital axis control VT-HMC...1X | Installation
Bosch Rexroth AG, Edition 01.2021, RE 30239-B
7.3.7 Keying
To prevent mismatch errors when connecting the VT-HMC...1X the plug-in
connectors can be keyed on the plug and on the device side by means of keying
elements made by Weidmüller that are included in the scope of supply.
Fig. 5: Inserting and breaking off keying elements on the plug-in contacts of the female multi-
point connector XG20
Fig. 6: Inserting and breaking off keying elements on the plug-in contacts of the male multi-point
connector XG21
Female multi-point
connector on device side
Male multi-point
connector on device side
To Next Page
Loading...
