Bosch Rexroth VT-HMC 1X Series - Fig. 10: Device;sensor supplied externally; Fig. 11: Sensor supplied by VT-HMC...1 X (3-conductor); Fig. 12: Sensor supplied by VT-HMC...1 X (4-conductor); Fig. 13: Device;sensor supplied externally (4-conductor cable)

24/36 Digital axis control VT-HMC...1X | Installation
Bosch Rexroth AG, Edition 01.2021, RE 30239-B
Fig. 10: Device/sensor supplied externally
Fig. 11: Sensor supplied by VT-HMC...1X (3-conductor)
Fig. 12: Sensor supplied by VT-HMC...1X (4-conductor)
Fig. 13: Device/sensor supplied externally (4-conductor cable)
* or b6 or b7
- - - For compensating for the voltage drop across the GDN cable, the connection
b2 - b1 can be made on the sensor. Precondition: i
2
• R <2 V
a2
n.c.
b2
b1*
Ai1+
Cin1
AGND
VT-HMC
AC
DC
OUT 4 - 20 mA
Voltage input
V
encoder_ANA
a1
a2
b2
b1*
Ai1+
Ai1-
AGND
VT-HMCSensor
U
B
(24 VDC)
OUT ±10 V
GND
i
2
• R <2 V
V
encoder_ANA
a1
a2
b2
b1*
Ai1+
Ai1-
AGND
VT-HMCSensor
U
B
(24 VDC)
OUT ±10 V
0 V
GND
Ai1+a2
b2
b1*
Ai1-
AGND
VT-HMC
i
2
• R <2 V
AC
DC
OUT ±10 V