5.4 SD card
Ordering code Part number Description
XA-SD01 R911173844 SD card 1 GB
Tab. 5-4: SD card
5.5 End clamp
Ordering code Part number Description
SUP-M01-ENDHALTER R911170685 2 pieces of snap-on end brackets for 35 mm NS 35/7.5
or NS 35/15 carrier plate; width: 9.5 mm
Tab. 5-5: End clamp
5.6 Wear parts
There are no wear parts in the controls IndraControl XM21 and XM22.
6
Ambient conditions
Ambient temperature in operation Up to 2,000 m: -25 °C to +60 °C
2,000 m to 3,000 m: max. +55 °C
3,000 m to 4,000 m: max. +50 °C
4,000 m to 4,700 m: max. +45 °C
Ambient temperature during storage and transport -30 °C to +85 °C
Operating altitude Up to 4,700 m above sea level acc. to DIN 60204
Permitted air humidity 5 % to 95 % acc. to DIN EN 61131-2, no conden-
sation
Degree of protection IP20 acc. to DIN EN 60 529
Protection class III, DIN EN 61010-2-201
Overvoltage category 2
Contamination level 2, no condensation allowed
Mechanical tests
Vibration resistance acc. to DIN EN 60068-2-6
①
Oscillations, sinusoidal in all three axes
5 Hz - 9 Hz with 3.5 mm amplitude
9 Hz -150 Hz with 5 g peak acceleration
Shock test acc. to DIN EN 60068-2-27 Shock stress: Shock resistance in all three axes,
11 ms semi-sinusoidal 30 g
Broadband noise acc. to DIN EN 60068-2-64
5-20-150 Hz with 0.572 g, 5 h per axis
IndraControl XM21, XM22 Controls 7/69
Ambient conditions
R911340667_Edition 04 Bosch Rexroth AG
To Next Page
Loading...
