1 About this documentation
Editions of this documentation
Edition Release
Date
Note
Edition 01 2014-07 First edition
Edition 02 2016-08 General revision and corrections
Edition 03 2017-03 Notes on the explosion protection (Atex) supplemented for XM22
Edition 04 2019-11 Notes on the explosion protection removed, supplements
Tab. 1-1: Change Record
1.1 Overview on target groups and product phases
In the following illustration, the framed activities, product phases and target
groups refer to the present documentation.
Example: In the product phase "Mounting (assembly/installation)", the target
group "mechanic/electrician" can execute the activity "install" using this docu-
mentation.
Presales Aftersales
Selection
Mounting
(assembly/installation)
Engineering
Commissioning
Operation
Decommissioning
Product
phases
Target
groups
Activities
Design engineer
Programmer
Technologist
Process
specialist
Select
Prepare
Design
Construct
Mechanic/
electrician
Unpack
Mount
Install
Programmer
Commissioning engineer
Parameterize
Program
Configure
Simulate
Technologist
Process specialist
Optimize
Test
Machine
operator
Maintenance
technician
Service
Operate
Maintain
Remove
faults
Create
the NC program
Mechanic/
electrician
Disposal company
Dismount
Dispose
Fig. 1-1: Assigning the present documentation to the target groups, product phases and ac-
tivities of the target group
This document instructs the technical staff of the machine manufacturer on how
to safely perform the mechanical and electrical installation and on how to com-
mission the device.
IndraControl XM21, XM22 Controls
1/69
About this documentation
R911340667_Edition 04 Bosch Rexroth AG
To Next Page
Loading...
