English | 13
Bosch Power Tools F 016 L81 624 | (2.8.16)
Intended Use
The garden product is intended for domestic lawnmowing.
Technical Data
Noise/Vibration Information
Sound emission values determined according to
EN 60335-2-77.
Typically the A-weighted noise levels of the product are:
Sound pressure level 79 dB(A); sound power level 93 dB(A).
Uncertainty K=2.0 dB.
Wear hearing protection!
Vibration total values a
h
(triax vector sum) and uncertainty K
determined according to EN 60335-2-77:
a
h
<2.5m/s
2
, K=1.5 m/s
2
.
Mounting and Operation
Troubleshooting
Weight
Switching On
Switching Off
Permitted action
Prohibited action
Accessories/Spare Parts
Lawnmower Rotak 320 ER
Article number
0 600 8A6 0..
Rated power input
W1200
Blade width
cm 32
Height of cut
mm 20 – 60
Grassbox, capacity
l31
Weight according to EPTA-
Procedure 01:2014
kg 8.0
Protection class
/II
Serial number
see type plate on
the garden product
The values given are valid for a nominal voltage [U] of 230 V. For differ-
ent voltages and models for specific countries, these values can vary.
Symbol Meaning
Action Figure Page
Delivery Scope
1 183
Handle Assembly
2 183
Snap together the Grassbox
3 184
Grassbox fitting/removing
3 184
Adjusting the Cutting Height
4 184
Connecting the extension lead
5 184
Starting
5 184
Stopping
5 184
Working Advice
5–6 184–185
Blade Maintenance
7 185
Selecting Accessories
7 185
Problem Possible Cause Corrective Action
Motor refuses to start Power turned off Turn power on
Mains socket faulty Use another socket
Extension cable damaged Inspect cable, replace if damaged
Fuse faulty/blown Replace fuse
Grass too long Increase height of cut and tilt garden product to re-
duce starting load
Motor protector has activated Allow motor to cool and increase height of cut
Machine functions
intermittently
Extension cable damaged Inspect cable, replace if damaged
Internal wiring of machine damaged Contact Service Agent
Motor protector has activated Allow motor to cool and increase height of cut
OBJ_BUCH-2960-001.book Page 13 Tuesday, August 2, 2016 3:32 PM
To Next Page
Loading...
