Bosch SAIC VDI III - Technical Data

1 689 989 458 2020-01-01
|
Robert Bosch GmbH
22 | VDI III | Technical data Technical data | VDI III | 22en
10. Technical data
Property Value/range
Host interface
Wired High-speed USB
480Mbps
Ethernet
10/100Mbps
WLAN USB stick 802.11b/g/n
Processor system
Microprocessor Intel MX6 Solo
Clock speed 800MHz
RAM 512MB DDR3
RAM
ROM 256MB flash
memory
User interface
LEDs 4 status LEDs
3 illuminated but-
tons
Beeper Signal tone
Power supply
From the vehicle battery using the
diagnostic connection cable or
from the computer using a
plugged-in USB connecting cable.
Caution: the diagnostic connec
-
tor of the vehicle must be pro-
tected by a fuse with a max. rat-
ing of 6A / 32V.
7V – 32V, 750mA
5V, 0.5A
Mechanical properties
Dimensions
165 x 115 x 40mm
(6.5 x 4.5 x
1.6inch)
Weight 0.24kg (0.53lb)
Operating temperature -20°C – +70°C
(-4°F – 158°F)
Storage temperature -20°C – +80°C
(-4°F – 176°F)
Humidity at 25°C 30% – 95%
Maximum operating altitude 4000m
Degree of protection with the di
-
agnostic connection cable not
connected
IP30
Degree of protection with the di
-
agnostic connection cable con-
nected according to IEC 60529
IP54, Cat. 2
Diagnostic connection cable
J1962 (ISO 15031-3)
Voltage resistance
DLC 26-pin
18V, Cat. 0