Bosch SAIC VDI III - Other Applicable Documents; Safety Instructions; Product Description; Intended Use

1 689 989 458 2020-01-01
|
Robert Bosch GmbH
8 | VDI III | Safety instructions Product description | VDI III | 9en
4.2 Scope of delivery
The VDI III base kit includes connecting cables
and hardware for transferring and reprogram
-
ming vehicle control units using the diagnostic
interface.
i The scope of delivery depends on the prod-
uct variant ordered as well as the special
accessories ordered and may deviate from
the following list.
2
3
4
5
1
DIAGNOSI
Item Kit component Part number Qty.
1 VCI system tester 1 699 200 873 1
2 Diagnostic connection
cable
(data transmission to
J1962)
1 699 200 366 1
3 USB connecting cable A
to B, 3m
F00K.108.653 1
4 WLAN USB stick – 2
5 Applicable documentation – 3
2.7 Other applicable documents
Designation
Document
number
Quick Start Guide 1 689 989 459
Important information and safety in
-
structions
1 689 989 460
Specifications – WLAN USB adapter 1 689 989 305
3. Safety instructions
! These operating instructions are intended
to ensure easy and safe setup and use of
VDI III. Read these operating instructions
and other applicable documentation careful
-
ly before using VDI III and the software.
4. Product description
4.1 Intended use
! If VDI III and the accessories supplied are
operated in any other way than the one
specified by the manufacturer in the operat
-
ing instructions, the protection provided by
VDI III and the
accessories supplied may be
compromised.
VDI III is a measuring instrument used by profes-
sional technicians in diagnosing, repairing and
programming electrical and electronic vehicle
systems. Additionally, the software application
with VDI III can be used to measure voltage
levels, for example.