Need help?Do you have a question about the Bosch SE 220 LSNi and is the answer not in the manual?
General| Brand | Bosch |
|---|---|
| Model | SE 220 LSNi |
| Category | Remote Starter |
| Language | English |
Overview of the SE 220 LSNi arming device, its components, and functional variants.
Diagrams and descriptions of the control unit's inputs, outputs, and terminals.
Guidance on mounting the control unit, reader, and code keypad safely and correctly.
Instructions for installing the SPE blocking element and its variants.
Procedure for installing magnetic and bolt contacts as per manufacturer's instructions.
Information on connecting components and setting the address switch.
Wiring diagram for connecting the control panel with optional components.
Wiring diagram for connecting the SmartKey code keypad with integrated reader.
Wiring diagram for connecting a lockable code keypad to the system.
Instructions for setting up the system to operate without an SPE blocking element.
Tests for the SPE blocking element and reader functionality after installation.
Procedures for reading keys into the system and initial programming.
Procedure for setting up the SmartKey code keypad or changing user codes.
Procedure for setting up a lockable code keypad or changing user codes.
Final steps to complete system installation and verify correct operation.
How to check the current status of the system using LEDs and the buzzer.
Step-by-step guide for arming and disarming the system with keys or codes.
Illustrates arming and disarming scenarios with multiple SmartKeys/keypads.
Troubleshooting common issues encountered during installation and key reading.
Interpreting Yellow LED status codes for diagnosing control unit faults.
Troubleshooting common operational problems encountered during system use.
Procedure for replacing a broken or stuck bolt in the SPE blocking element.
Procedures for inspecting and maintaining system components and functionality.
Guidance on handling lost keys, ordering new ones, and managing security cards.
Procedure for resetting the system to its default factory settings.
Technical specifications for the SE 220 LSNi control unit and blocking element.
Technical specifications for the reader, lockable keypad, SmartKey keypad, and keys.
List of relevant laws, standards, and directives the system complies with.
To Next Page