Troubleshooting en-us
37
3 Troubleshooting
Troubleshooting
Dishwashers may occasionally
exhibit problems that are unrelated to
a malfunction of the dishwasher itself.
The following information may help
you with a dishwasher problem
without involving a repair
professional.
Problem Cause Action
Dishwasher
does not start
Door may not be properly latched. Shut the door completely until you hear a
click.
Dishwasher may not be turned on. Press the main power switch ( to turn
dishwasher on.
Dishwasher not reset or previous
cycle not completed.
Reset the dishwasher.
Delay start engaged. Reset Delay start. ~ "Delay Start"
on page 30
Interruption of electrical power
supply to dishwasher or blown fuse.
Check circuit breaker.
The door may have been closed
without first selecting a cycle.
Select a cycle and close the door.
Water supply may not be turned on. Check and turn on water supply.
Cycle does not
resume after
door is opened
and closed
during cycle.
Door is opened longer than
4 seconds after a cycle has started.
Press Start button again to resume cycle.
Display does
not illuminate
A fuse may have been blown or
circuit breaker tripped.
Check the fuse or circuit breaker box and
replace the fuse or reset the breaker if
necessary.
Door not closed or latched.
Note: For models with controls on
top of the door, the display only
illuminates when the door is opened
and controls are visible.
Ensure door is properly latched and
completely closed.
To Next Page
Loading...
Need help?
General
